[cisco-voip] Incompatible destination

[Bryan Deaver]

Try under the voice-port the command "bearer-cap speech".

Bryan



> From: Paulo Gomes <paulo.gms at netc.pt>
> Date: Fri, 04 Mar 2005 00:40:11 +0000 (GMT)
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Incompatible destination
> 
> 
> Hello everybody! 
> 
> I have a h323 client (PC) calling trough a gateway (cisco 2600) to a PBX. Here
> is the diagram.
> 
>  H323 PC-----------(e0/0) (Bri1/0)GW 2600
>                                        |
>                                        |
>                                     PBX ----- Phone
> 
>  From Phone to H323 PC works good, from H323 PC don't work. I activated debug
> and the error is "Incompatible Destinattion". I dink that the call goes to PBX
> in data format in instead of voice format!!!!!!!
> 
> /*** My Bri configuration
> /***************************
> interface BRI1/0
> no ip address
> isdn switch-type basic-net3
> isdn incoming-voice voice
> 
> 
> /*** My voice-port configuration
> /***************************
> voice-port 1/0/0
> compand-type a-law
> cptone PT
> 
> /*** My dial-peer configuration
> /***************************
> dial-peer voice 301 voip
> destination-pattern 503
> session target ipv4:11.0.0.10
> codec g711alaw
> 
> Anyone knows how do I resolve this?????????????????????
> 
> Tanks to everyone
> 
> Paulo Gomes
> Leiria-Portugal
> 
> ______________________________________________________________________
> Novo Serviço IOL Dicionarios. 13 Linguas diferentes!
> Saiba mais - http://www.iol.pt/correio/rodape.php?dst=0501251
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip