[cisco-voip] Incompatible destination

[Paulo Gomes]

Hello everybody! 

I have a h323 client (PC) calling trough a gateway (cisco 2600) to a PBX. Here is the diagram.

   H323 PC-----------(e0/0) (Bri1/0)GW 2600 
                                         |
                                         |
                                      PBX ----- Phone

   From Phone to H323 PC works good, from H323 PC don't work. I activated debug and the error is "Incompatible Destinattion". I dink that the call goes to PBX in data format in instead of voice format!!!!!!!

/*** My Bri configuration
/***************************
interface BRI1/0
 no ip address
 isdn switch-type basic-net3
 isdn incoming-voice voice


/*** My voice-port configuration
/***************************
voice-port 1/0/0
 compand-type a-law
 cptone PT

/*** My dial-peer configuration
/***************************
dial-peer voice 301 voip
 destination-pattern 503
 session target ipv4:11.0.0.10
 codec g711alaw

Anyone knows how do I resolve this?????????????????????

Tanks to everyone

Paulo Gomes
Leiria-Portugal

______________________________________________________________________
Novo Serviço IOL Dicionarios. 13 Linguas diferentes!
Saiba mais - http://www.iol.pt/correio/rodape.php?dst=0501251