[cisco-voip] CFwdALL doesn't work

[Marcin Nowacki]

Hello

Check Publishers databases . We had such a problem and it was :

CSCdy57036: Database failback not always working

Check on the cisco.com , I don't have links but when you go to bug tool
you should find short solution.

Maybe it will help you.

Marcin

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Wednesday, March 09, 2005 2:18 PM
To: Hiroko Fujii
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CFwdALL doesn't work

When you set the CFA via CCMUser does it actually show up on the phone? 
   Also, if you then call the phone does CM actually forward the call?

We've seen a few issues with CFA in 4.x caused by SDL links going out 
of service (OOS), which will actually cause a CallManager error in the 
Application log.   If the node that the other CMs lose the connection 
to happens to be responsible for handing out change notifications then 
(without going into too much detail) Bad things can happen.

-Ryan
On Mar 8, 2005, at 8:41 PM, Hiroko Fujii wrote:

Hi,

We upgraded CCM to 4.1 and then CFwdALL softkey doesn't get to work.
Once we push CFwdALL key on the phone and enter the numbers to be
forwarded then we get busy tone. We can set Call forward all from
CCMUsers or CCMAdmin Web pages instead. I'm not sure how to determine
this cause...
Any comments would be appreciated.

Thank you,
Hiroko

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip