[cisco-voip] Long Distance on PRI - Callmanager

[Wes Sisk]

Unfortunately not, it is an outstanding feature request: CSCdt68985.  
Ring up your Cisco SE.

/Wes

Voll, Scott wrote:

>Nick--
>
>This is done on the Gateway interface config at the bottom.
>
>Device -- Gateway -- click on gateway interface -- Scroll to bottom
>
>Look under Outbound calls.
>
>You would change called party ie number type to national and called
>numbering plan to ISDN.
>
>I'm not sure if this will fix everything though.  He said the tollfree
>needs to be unknown and I don't know if there is a way to specify both
>national and unknown via a route pattern.
>
>Scott
>
>-----Original Message-----
>From: cisco-voip-bounces at puck.nether.net
>[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Marus
>Sent: Thursday, March 10, 2005 9:50 AM
>To: cisco-voip at puck-nether.net
>Subject: [cisco-voip] Long Distance on PRI - Callmanager
>
>Just cutting over a pri circuit, dms-100 with ni2 emulation. Local and
>toll free dialing work fine. Yet long distance does not. the provider
>is saying I need to flag long distance call as "national" and tollfree
>as "unknown". The onsite tech used his tbird to place a long distance
>call successfully as well...
>
>Any idas? Not sure where I'd adjust this? The gateway is 2821 setup with
>mgcp.
>
>Thanks,
>
>  
>