[cisco-voip] 7914 - Monitor Only

[Dave Temkin]

Not that it helps you, but yes, you are correct - in CME you would just set the key as M and it would only be a monitor key (not ring, etc.)

On Fri, 18 Mar 2005 09:43:39 -0500, King, Jesse wrote
> I wish it was that simple. That only make the phone flash and not make noise, but it sill comes up on the main display to answer - Which could get real confusing with 28 monitored lines with incoming calls... 
>   
> I have read it is possible with CME, but not CM... 
>   
> BTW, congrats on the CIPTUG board... 
>   
> Jesse
> 
>

-----------------------------------------------------------------------

From: Tim Medley [mailto:medley at mac.com] 
> Sent: Friday, March 18, 2005 9:29 AM
> To: King, Jesse; 'cisco-voip at puck-nether.net'
> Subject: RE: [cisco-voip] 7914 - Monitor Only
> 
> 
> For each line on the 7914 that you do not want to ring, set the ring status to Disabled.

>

 

> tm

>

 

> 
> Tim Medley

> http://www.medleylabs.com

>  

> http://www.sccp2000.com IP Telephony News, Tips and Tricks

> 
>

> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of King, Jesse
> Sent: Friday, March 18, 2005 9:19 AM
> To: cisco-voip at puck-nether.net
> Subject: [cisco-voip] 7914 - Monitor Only

>

 

> 
> I think I already know the answer to this -

> 
>  

> 
> But I have a phone with two 7914's that the operator would like to just use to monitor - See the state of the line (on,off, ringing, etc). She also does use Call Attendant, but the 7914 would add a little extra 'hard' feature.

> 
>  

> 
> The problem is if the monitored line rings, it comes up on the main 7960 display to answer - (with ring/flash disabled). I don't see away around this.

> 
>  

> 
> Anyone have any suggestions?

> 
>  

> 
>  

> 
> Thanks.

> 
>  

> 
> Jesse

David Temkin

-----------------------------------------------------------------------

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050318/cf5be7b3/attachment-0001.html