[cisco-voip] CallManager "walk thru" document

[Lelio Fulgenzi]

I hear what you are saying. I would have liked something like that too. But I found, if you look at CallManager like a new programming language and the SRND as the manual, you'll be better off in the long run. Understanding the concepts is the hardest part in learning CallManager.

If you are looking for a quick and dirty proof of concept, then simply install CallManager on an approved server, and create two partitions and two calling search spaces and put both partitions into each calling search space. Add two phones, one into each partition and assign each phone one of the calling search spaces. Voila.  You can test how things work/break by removing partitions from the search spaces.

I'm sure if you post to the group as you go through the steps you should be able to get it going.

  ----- Original Message ----- 
  From: Brian Feeny 
  To: Lelio Fulgenzi 
  Cc: cisco-voip at puck.nether.net 
  Sent: Tuesday, March 22, 2005 7:55 AM
  Subject: Re: [cisco-voip] CallManager "walk thru" document



  Thanks,

  Well, when I say "install" I really meant "install and configure" a  
  basic, even very basic, working setup where you have at least some  
  functionality.  Thanks for sending me the link.

  Brian

  On Mar 21, 2005, at 11:00 PM, Lelio Fulgenzi wrote:

  > I think the best thing to start with is the Cisco IP Telephony  
  > Solution Reference Network Design (SRND) for Cisco CallManager 4.0
  > 
  > Read through it and you should get the basics.
  > 
  > Installing CallManager is pretty simple from what I remember. Very  
  > little options other than plugging in a few parameters.
  > 
  > -----   
  > -----
  > Lelio Fulgenzi, B.A.   
  > lelio at uoguelph.ca.eh
  > Network Analyst (CCS)
  > University of Guelph FAX:(519) 767-1060  
  > JNHN
  > Guelph, Ontario N1G 2W1 TEL:(519) 824-4120  
  > x56354
  > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  > ^^^
  > remove the 1st letter of the canadian alphabet from my email, eh!
  > ----- Original Message -----
  >  From: Brian Feeny
  > To: cisco-voip at puck.nether.net
  > Sent: Monday, March 21, 2005 10:12 PM
  > Subject: [cisco-voip] CallManager "walk thru" document
  >
  > Does anyone have a document or a link to a document that essentially
  >  "walks you thru" a working CM installation from start to finish? I
  > don't care how basic, it can be 3 phones and a basic dialplan, just
  > something thats pretty complete or close to complete.
  >
  > appreciate any help,
  >
  > Brian
  >
  > _______________________________________________
  > cisco-voip mailing list
  > cisco-voip at puck.nether.net
  > https://puck.nether.net/mailman/listinfo/cisco-voip
  > _______________________________________________
  > cisco-voip mailing list
  > cisco-voip at puck.nether.net
  > https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050322/d5430e3b/attachment.html