[cisco-voip] Another MOH Question

[Anthony Mendoza]

I just had to do it..let me look up that helpdesk ticket...

1) go to call manager administration web page

2) select the service menu from the top and selct "service parameters"

3) then select the service "cisco MOH Audio Translator" from the top
down box

4) then press the advance button on the righthand side top corner.

5) Then you will see a parameter "default MOH Volume level " and its
valu will be set to "-24"
you can increase the value to -20, -16.........
you can decrease the value to -28 or -30 and then check..

I changed ours to -24..for some reason it was set to -10.
--
Anthony Mendoza

Rusty Painter sent a message, dated 3/23/2005 2:04 PM about:
> 
> 
> Sorry for all the posts, but I have had some users complaining that the 
> MOH is too loud.  How can we turn it down?  Thanks again for your help.
> 
>  
> 
> ** Rusty Painter **
> 
> MCP/A+
> 
> Microcomputer Technician
> 
> Dorchester County ITS
> 
> 201 Johnston St .
> 
> St. George , SC 29477
> 
> Tel:           (843) 563-0022
> 
> Fax:          (843) 563-0033
> 
> E-mail:       rpainter at dorchestercounty.net 
> <mailto:rpainter at dorchestercounty.net>
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


CONFIDENTIALITY NOTICE: The information contained in this message and
or attachments is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination, copying, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you received this e-mail or its attachments in error, 
please contact the sender and delete the material from any system and 
destroy any copies.