[cisco-voip] Call manager 4.12 and client modem dial out
Carter, Bill
WCarter at sentinel.com
Tue Mar 29 13:35:15 EST 2005
Don't use an ATA for Modem. Use an FXS port off a gateway.
________________________________
From: Voll, Scott [mailto:Scott.Voll at wesd.org]
Sent: Tuesday, March 29, 2005 12:09 PM
To: Scott Ingram; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Call manager 4.12 and client modem
dial out
What are you trying to do? You need to setup a modem? You will
need an analog adapter like an ATA.
Scott
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Ingram
Sent: Tuesday, March 29, 2005 10:04 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Call manager 4.12 and client modem dial
out
I need to configure outbound modem access through the Call
manager. I think I have to create dummy numbers that will route for
outbound only. I'm kind of lost on the rest of the process.
Scott Ingram
Manager of Network operations and Design
Clayton Services, Inc
T: 203-926-8148
F: 203-926-5751
singram at clayton.com
More information about the cisco-voip
mailing list