[cisco-voip] Call manager 4.12 and client modem dial out
Scott Ingram
SIngram at clayton.com
Tue Mar 29 13:39:46 EST 2005
The Modem DID numbers are not copper it is off my PRI.
-----Original Message-----
From: Carter, Bill [mailto:WCarter at sentinel.com]
Sent: Tuesday, March 29, 2005 1:35 PM
To: Voll, Scott; Scott Ingram; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Call manager 4.12 and client modem dial out
Don't use an ATA for Modem. Use an FXS port off a gateway.
________________________________
From: Voll, Scott [mailto:Scott.Voll at wesd.org]
Sent: Tuesday, March 29, 2005 12:09 PM
To: Scott Ingram; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Call manager 4.12 and client modem
dial out
What are you trying to do? You need to setup a modem? You will
need an analog adapter like an ATA.
Scott
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Ingram
Sent: Tuesday, March 29, 2005 10:04 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Call manager 4.12 and client modem dial
out
I need to configure outbound modem access through the Call
manager. I think I have to create dummy numbers that will route for
outbound only. I'm kind of lost on the rest of the process.
Scott Ingram
Manager of Network operations and Design
Clayton Services, Inc
T: 203-926-8148
F: 203-926-5751
singram at clayton.com
IMPORTANT NOTICE:
This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message. If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.
More information about the cisco-voip
mailing list