[cisco-voip] Call manager 4.12 and client modem dial out

[Court Schuett]

You can still do that.  Create a hairpin and swing them back out the FXS
port.  I would recommend MGCP on the FXS ports.  H323 will work, but I
had much better luck with the MGCP.

Court Schuett
 
cschuett at hprlogistics.com
630-909-5560

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Ingram
Sent: Tuesday, March 29, 2005 12:40 PM
To: Carter, Bill; Voll, Scott; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Call manager 4.12 and client modem dial out

The Modem DID numbers are not copper it is off my PRI.

-----Original Message-----
From: Carter, Bill [mailto:WCarter at sentinel.com] 
Sent: Tuesday, March 29, 2005 1:35 PM
To: Voll, Scott; Scott Ingram; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Call manager 4.12 and client modem dial out

Don't use an ATA for Modem. Use an FXS port off a gateway. 


________________________________

	From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
	Sent: Tuesday, March 29, 2005 12:09 PM
	To: Scott Ingram; cisco-voip at puck.nether.net
	Subject: RE: [cisco-voip] Call manager 4.12 and client modem
dial out
	
	

	What are you trying to do?  You need to setup a modem?  You will
need an analog adapter like an ATA.

	 

	Scott

	 

	________________________________

		From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Ingram
	Sent: Tuesday, March 29, 2005 10:04 AM
	To: cisco-voip at puck.nether.net
	Subject: [cisco-voip] Call manager 4.12 and client modem dial
out

	 

	I  need to configure outbound modem access through the Call
manager.  I think I have to create dummy numbers that will route for
outbound only.  I'm kind of lost on the rest of the process.  

	 

	Scott Ingram

	Manager of Network operations and Design

	Clayton Services, Inc

	T: 203-926-8148

	F: 203-926-5751

	singram at clayton.com

	 

	 

	 


IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential and exempt from disclosure under applicable law.  If you
have received this message in error, you are hereby notified that we do
not consent to any reading, dissemination, distribution or copying of
this message.  If you have received this communication in error, please
notify the sender immediately and destroy the transmitted information.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip