[cisco-voip] Fax Machines

[Rusty Painter]

Hello.  I have several (about 24) fax machines on a VG224.  A good many of
them can not fax out long distance.  All of the ports have the same device
pool, CSS, etc.  All DNs are on the same partition.  I can dial all of these
numbers from a regular VoIP telephone configured in the same partition,
device pool, CSS, etc.  When we dial long distance, it prompts us for a long
distance code.  The fax machines are being prompted for that code, but then
they get a fast busy.  I can reset the gateway, and it might work once, but
then not again?  We just replaced the Vg224, thinking that it was bad.  No
such luck.  Any advice?
 
Rusty Painter
MCP/A+
Microcomputer Technician
Dorchester County ITS
201 Johnston St.
St. George, SC 29477
Tel:           (843) 563-0022
Fax:          (843) 563-0033
E-mail:       <mailto:rpainter at dorchestercounty.net>
rpainter at dorchestercounty.net
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050329/cbac3dcc/attachment-0001.html