[cisco-voip] FXO port configuration to a Valcom paging system

[King, Jesse]

Not sure if an fxo would work? I use fxs for all my paging.. Valcom, bogen, etc...

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Scott Ingram
Sent: Wednesday, March 30, 2005 10:09 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXO port configuration to a Valcom paging system



We have a Valcom page system and I have set up my FXO 2/0/0 ->

!

dial-peer voice 999200 pots

 application mgcpapp

 port 2/0/0

!

 However, when I dial I get a pause and a then a fast busy.  I have set the port sub unit to the device pool, etc. I have a route for 89 as the page number.  On the Nortel you dial 89 then 1 through 4 for the zones.  Any thoughts?

 

 

 

Scott Ingram

Manager of Network operations and Design

Clayton Services, Inc

T: 203-926-8148

F: 203-926-5751

singram at clayton.com

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050331/bf4cdb33/attachment-0001.html