[cisco-voip] FXO port configuration to a Valcom paging system

[Court Schuett]

Same here.  Pretty sure you should use an FXS for that.  In addition, we
had a lot of trouble with ours and MGCP.  H323 worked just fine though.
Not sure what the issue was, but H323 solved it.

 

 

Court Schuett

 

cschuett at hprlogistics.com

630-909-5560

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of King, Jesse
Sent: Thursday, March 31, 2005 7:47 AM
To: Scott Ingram; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] FXO port configuration to a Valcom paging
system

 

Not sure if an fxo would work? I use fxs for all my paging.. Valcom,
bogen, etc...

	-----Original Message-----
	From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Scott Ingram
	Sent: Wednesday, March 30, 2005 10:09 PM
	To: cisco-voip at puck.nether.net
	Subject: [cisco-voip] FXO port configuration to a Valcom paging
system

	We have a Valcom page system and I have set up my FXO 2/0/0 ->

	!

	dial-peer voice 999200 pots

	 application mgcpapp

	 port 2/0/0

	!

	 However, when I dial I get a pause and a then a fast busy.  I
have set the port sub unit to the device pool, etc. I have a route for
89 as the page number.  On the Nortel you dial 89 then 1 through 4 for
the zones.  Any thoughts?

	 

	 

	 

	Scott Ingram

	Manager of Network operations and Design

	Clayton Services, Inc

	T: 203-926-8148

	F: 203-926-5751

	singram at clayton.com

	 

	 

	 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050331/e59a4075/attachment.html