[cisco-voip] FXO port configuration to a Valcom paging system
Scott Ingram
SIngram at clayton.com
Thu Mar 31 11:22:44 EST 2005
Yes I have a route pattern that points to the FXO. I get a fast busy
after a pause
________________________________
From: Tim Frazee [mailto:tfrazee at aosgs.com]
Sent: Thursday, March 31, 2005 10:45 AM
To: Scott Ingram
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] FXO port configuration to a Valcom paging
system
Do you have a route pattern setup in ccm to push calls that goto (paging
extension) to the FXO port of your choice?
Timothy Frazee
Enterprise Engineer
AOS Global Solutions <http://www.gsgi.com/>
Cisco IP Phone: 636.680.1065
Cellular Phone: 314.753.7506
________________________________
From: Scott Ingram [mailto:SIngram at clayton.com]
Sent: Thursday, March 31, 2005 9:41 AM
To: Tim Frazee; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] FXO port configuration to a Valcom paging
system
FXO + MGCP
________________________________
From: Tim Frazee [mailto:tfrazee at aosgs.com]
Sent: Thursday, March 31, 2005 10:39 AM
To: Scott Ingram; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] FXO port configuration to a Valcom paging
system
And you want to use a FXO, mgcp ?
Timothy Frazee
Enterprise Engineer
AOS Global Solutions <http://www.gsgi.com/>
Cisco IP Phone: 636.680.1065
Cellular Phone: 314.753.7506
________________________________
From: Scott Ingram [mailto:SIngram at clayton.com]
Sent: Thursday, March 31, 2005 9:36 AM
To: Tim Frazee; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] FXO port configuration to a Valcom paging
system
2003A
________________________________
From: Tim Frazee [mailto:tfrazee at aosgs.com]
Sent: Thursday, March 31, 2005 10:33 AM
To: Scott Ingram; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] FXO port configuration to a Valcom paging
system
Importance: High
What model valcom are you using?
2003A
9970?
9940?
The model will determine the FXO/FXS. I have installed a ton of these
types. Let me know, I'll help you out.
Timothy Frazee
Enterprise Engineer
AOS Global Solutions <http://www.gsgi.com/>
Cisco IP Phone: 636.680.1065
Cellular Phone: 314.753.7506
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Ingram
Sent: Wednesday, March 30, 2005 9:09 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXO port configuration to a Valcom paging system
We have a Valcom page system and I have set up my FXO 2/0/0 ->
!
dial-peer voice 999200 pots
application mgcpapp
port 2/0/0
!
However, when I dial I get a pause and a then a fast busy. I have set
the port sub unit to the device pool, etc. I have a route for 89 as the
page number. On the Nortel you dial 89 then 1 through 4 for the zones.
Any thoughts?
Scott Ingram
Manager of Network operations and Design
Clayton Services, Inc
T: 203-926-8148
F: 203-926-5751
singram at clayton.com
IMPORTANT NOTICE:
This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message. If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050331/5aac2255/attachment-0001.html
More information about the cisco-voip
mailing list