[cisco-voip] Meet-Me Announcing

[Aaron Kent]

Fixes

 

Option 1 (Free if you have Unity)

1.	What version of CCM, (3.x has an issue with MeetMe being in
partitions if they are not XXX[X-X])
2.	Setup the MeetMe in a secured partition so only a receptionist
phone or Sr. VP can open the MeetMe via a CSS restriction.
3.	Create a VM Profile in Unity and send the call to Unity with a
translation pattern that affects everyone but the Receptionist and Sr.
VPs.
4.	Select the announce caller option and have it connect to the
MeetMe number via CSS and Translation that only Unity VM ports can use.

 

Option 2  (Free is you have CRS (IPCX or Co-Resident CRS Install)

1.	Use CCM and setup a CTI_RoutePoint and Script the options you
want via CRS

 

Option 3 (Asterisk)

1.	Look at their site and forums

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Court Schuett
Sent: Thursday, March 31, 2005 2:49 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Meet-Me Announcing

 

We just started showing everyone the features and capabilities of the
Meet-Me conference bridge, and everyone loves it.  They've started using
it, and you can guess where this is going.  They were talking and didn't
realize someone was in the call because they didn't hear his beep.  Is
there a way to announce the entries?  Or flash a light or make the beep
louder?  I've been looking all over for it and haven't found anything.
The only other workaround I thought of was using an operator to take the
calls, then announce and transfer the calls.  Is there an automatic way
to do that?

 

Thanks.

 

 

 

Court Schuett

 

cschuett at hprlogistics.com

630-909-5560

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050331/b0cd835f/attachment.html