[cisco-voip] IP Phones/various firmware loads
Bob A. Bowie
bababooey at cox.net
Fri Jun 9 00:37:56 EDT 2006
[cisco-voip] IP Phones/various firmware loadsCCM 4.1.3sr2, OServ 2000.7sr8
----- Original Message -----
From: Brian Henry
To: bababooey at cox.net ; cisco-voip at puck.nether.net
Sent: Thursday, June 08, 2006 6:30 PM
Subject: RE: [cisco-voip] IP Phones/various firmware loads
You can have different loads for phone model on various endpoints.
7960-1 - 8.0(1)
7960-2 - 8.0(2)
7960-3 - 8.0(3)
Just make sure you have all the files in the TFTP dir and go to the phone(device) and there is a place that you can put in the name of the phone load that you want.
Part-2
What version of CCM? and OSver? 2000.7 or 2000.4.X?
Brian
------------------------------------------------------------------------------
From: cisco-voip-bounces at puck.nether.net on behalf of bababooey at cox.net
Sent: Thu 6/8/2006 3:33 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] IP Phones/various firmware loads
Is it possbile to have different firmware loads for various models of the IP Phones in CCM 4.1. I have mostly 7960 and 7970 but I want to keep the remote site 7970 at current revision.
Also, I have a 7970 that is stuck on the upgrade splash screen I have tried erase and factory reset to no avail, does anyone have other tips to bring a 7970 back to life.
THanks
Bob
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060609/ef95d4a4/attachment-0001.html
More information about the cisco-voip
mailing list