[cisco-voip] PVDMs! What are they good for?

[Hinson, Greg]

PVDM's are your dsp resources that are used for transcoding and
conference bridging. Depending on the hardware installed, you'll either
have PVDM or PVDMII modules. (PVDMII has twice the capacity)
 
-Greg
 
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, June 09, 2006 12:23 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] PVDMs! What are they good for?
 
Can anyone explain briefly what the PVDMs are used for on the routers?
Do I need these if I am going to be running T1s, FXOs and SRST or do I
need them just for conferencing?
 
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060609/f8db8692/attachment-0001.html