[cisco-voip] 7960 Phone - connected via the 10/100PC

[Linsemier, Matthew]

I was wondering if anyone knew the potential effects of a phone running
connected to the 10/100PC port rather then the correct 10/100SW port.
We are in the second phase of our Teleworker rollout (replacing the old
routers with new Cisco 870's) and I am finding that our helpdesk that
originally helped many users setup their home setup had their phones
connected to the older 831/837 routers via their 10/100PC port.  These
happen to be some of the same people that were also complaining about
voice quality (even though the policy-maps showed that voice was being
prioritized correctly).  Has anyone run across this? 

 

Matthew M. Linsemier, CCSP/CCNP/CCDA
Senior Network Engineer
APCapital
Voice: 517.324.6695
Fax: 517.333.2812
E-Mail: mlinsemier at apcapital.com

 


--------------------------------------------------------------------------------

CONFIDENTIALITY STATEMENT

This communication and any attachments are CONFIDENTIAL and may be 
protected by one or more legal privileges. It is intended solely
for the use of the addressee identified above. If you are not 
the intended recipient, any use, disclosure, copying or 
distribution of this communication is UNAUTHORIZED. Neither this 
information block, the typed name of the sender, nor anything 
else in this message is intended to constitute an electronic 
signature unless a specific statement to the contrary is 
included in this message. If you have received this communication in 
error, please immediately contact me and delete this communication from
your computer. Thank you.

--------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060609/9133640d/attachment.html