[cisco-voip] network-clock-select vs. c3745
Hassan Salama
hsalama_us at yahoo.com
Mon Jun 12 08:40:42 EDT 2006
Hi,
could you have a look on this document:
http://www.cisco.com/en/US/partner/products/hw/routers/ps259/products_tech_note09186a008031a072.shtml
[it may help if you didn't read it before]
Thanks and regards,
--- Andre Beck <cisco-voip at ibh.net> wrote:
> Hi,
>
> hunting fax issues, I tried to correct the clocking
> of a certain c3745
> that is fitted with several NM-HD-2Vs bearing
> VIC2-2BRI-NT/TE and
> VIC-4FXS/DID WICs. IOS is 12.4(8), aka the latest
> stable one. How
> should I interpret this dialog:
>
> phonebox-tz1(config)#network-clock-select ?
> <1-8> priority
>
> phonebox-tz1(config)#network-clock-select 1 ?
> % Unrecognized command
> phonebox-tz1(config)#network-clock-select 1 bri1/0
> ^
> % Invalid input detected at '^' marker.
>
>
> I can configure network-clock participation, but I
> cannot select a
> source. This is supposed to work on this platform
> since 12.3 main-
> line...
>
> TIA,
> Andre.
> --
> The _S_anta _C_laus _O_peration
> or "how to turn a complete illusion into a
> neverending money source"
>
> -> Andre Beck +++ ABP-RIPE +++ IBH Prof. Dr.
> Horn GmbH, Dresden <-
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
More information about the cisco-voip
mailing list