[cisco-voip] AD plugin on a W2k3 Domain

[Johan Bloemhard]

Are you using SSL or rather LDAPS?  I know that AD 2003 has some
differences in what you can do through LDAP-requiring LDAPS for some
operations.

 

Johan Bloemhard 
Senior Information Technology Specialist 
___________________________________ 
Silver Falls School District 4J 
802 Schlador Street 
Silverton, OR 97381 
w: 503.873.6331 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Burton
Sent: Tuesday, June 13, 2006 8:55 AM
To: Ryan Ratliff
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Importance: Low

 

Nope same result.

 

________________________________

From: Ryan Ratliff
Sent: Tue 6/13/2006 11:51 AM
To: Jason Burton
Cc: Kevin Thorngren; cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain

Try CN=user, CN=container,DC=domain,DC=com.
 
 
-Ryan
 
On Jun 13, 2006, at 11:46 AM, Jason Burton wrote:
 
Well after doing the packet capture I'm getting invalid credentials  
error in the Bind result.
 
It's LDAPErr DSID-0c09334.  What is the correct format for AD Admin DN?
 
CN=USER, OU=Container, DC=domain, DC=Domain?
 
From: Jason Burton
Sent: Tue 6/13/2006 11:08 AM
To: Kevin Thorngren
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
 
Thanks, downloading Ethereal now.
 
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
 
The quickest way to isolate the issue is with a packet capture of the  
Publisher when doing the AD Plugin. Looking at the LDAP packets  
should help you see what the failure is. Kevin On Jun 13, 2006, at  
10:52 AM, Jason Burton wrote: > Nope, just a router on a stick. > >  
From: Voll, Scott > Sent: Tue 6/13/2006 10:50 AM > To: Jason Burton;  
cisco-voip at puck.nether.net > Subject: RE: [cisco-voip] AD plugin on a  
W2k3 Domain > > Is there any pix between the CM and AD?  If so, we  
ran into a problem > with the fixup 389. >   > > From: cisco-voip- 
bounces at puck.nether.net > [mailto:cisco-voip-bounces at puck.nether.net]  
On Behalf Of Jason Burton > Sent: Tuesday, June 13, 2006 7:43 AM >  
To: cisco-voip at puck.nether.net > Subject: [cisco-voip] AD plugin on a  
W2k3 Domain >   >  I'm trying to install the AD plugin and keep  
getting the following > error: >   > Error:Setup failed to connect.  
Please enter your Host Name, Port > Number, Directory Administrator  
DN and Password again! >   > I've verified these 100 times over and  
still no luck.  This is the > first time I've tried this to a widnows  
2003 domain.  Any ideas? >   > Thanks in advance!! >   
_______________________________________________ > cisco-voip mailing  
list > cisco-voip at puck.nether.net > https://puck.nether.net/mailman/ 
listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 

______________________
Disclaimer: This message may be legally privileged and/or is intended only for the use of the addressee(s).  The content and views expressed in this email may represent the views of the sender and not those of Silver Falls School District. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060616/a81e7fbb/attachment.html