[cisco-voip] Different rings on the same phone set?

[Miller, Steve W.]

Oh, OK.  There doesn't seem to be a list of different rings when I
access the ring types from the settings on the phone.  I just see
"default" and then "chirp".
 

Steve W. Miller 
Telecom Engineer 
HOWREY, LLP 
1299 Pennsylvania Ave, NW 
Office IT103 (on B3 Level) 
Washington, DC 20004 
202-383-6949 (11-6949) 

 

________________________________

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Monday, June 19, 2006 3:32 PM
To: Miller, Steve W.; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Different rings on the same phone set?


These must be set on the phone.
 
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."

	----- Original Message ----- 
	From: Miller, Steve W. <mailto:MillerSW at howrey.com>  
	To: Lelio Fulgenzi <mailto:lelio at uoguelph.ca>  ;
cisco-voip at puck.nether.net 
	Sent: Monday, June 19, 2006 3:28 PM
	Subject: RE: [cisco-voip] Different rings on the same phone set?

	On the line settings on our Call Manager, we have:
	 
	Ring settings IDLE
	Ring settings ACTIVE
	 
	and under each of these fields, we have:
	 
	disable
	Flash Only
	Ring Once
	Ring
	 
	But I don't see anything about ring TYPE.  Where do you go to
see what rings are available?  Thank you!
	 

	Steve W. Miller 
	Telecom Engineer 
	HOWREY, LLP 
	1299 Pennsylvania Ave, NW 
	Office IT103 (on B3 Level) 
	Washington, DC 20004 
	202-383-6949 (11-6949) 

	 

________________________________

	From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
	Sent: Monday, June 19, 2006 2:37 PM
	To: cisco-voip at puck.nether.net
	Subject: Re: [cisco-voip] Different rings on the same phone set?
	
	
	Can you be more specific? Are you looking for different ring
tones? If so, yes. Just follow the prompts in the ring settings section
of the settings.
	 
	If you're looking for different number of rings to voicemail,
you need 4.1(x) I believe.
	 
	
------------------------------------------------------------------------
--------
	Lelio Fulgenzi, B.A.
	Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1
	(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
	
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
	"I can eat fifty eggs." "Nobody can eat fifty eggs."

		----- Original Message ----- 
		From: Miller, Steve W. <mailto:MillerSW at howrey.com>  
		To: Voll, Scott <mailto:Scott.Voll at wesd.org>  ; Lelio
Fulgenzi <mailto:lelio at uoguelph.ca>  ; cisco-voip at puck.nether.net 
		Sent: Monday, June 19, 2006 2:29 PM
		Subject: Different rings on the same phone set?

		Can you have different rings for different numbers on
the same 7960? If so, how?  Thank you!
		 

		Steve W. Miller 
		Telecom Engineer 
		HOWREY, LLP 
		1299 Pennsylvania Ave, NW 
		Office IT103 (on B3 Level) 
		Washington, DC 20004 
		202-383-6949 (11-6949) 




------------------------------------------------------------------------
-------------------------
This email and any attachments contain information from the law firm of
Howrey LLP, which may be confidential and/or privileged. 
The information is intended to be for the use of the individual or
entity named on this email. 
If you are not the intended recipient, be aware that any disclosure,
copying, distribution or use of the contents of this email is
prohibited. 
If you receive this email in error, please notify us by reply email
immediately so that we can arrange for the retrieval of the original
documents at no cost to you.	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060619/592d3aed/attachment-0001.html