[cisco-voip] Different rings on the same phone set?

Lelio Fulgenzi lelio at uoguelph.ca
Mon Jun 19 15:45:24 EDT 2006


This can be one of two things, the default setting with no changes, or an error in loading the ring list file. Try this: Settings > Ring Type > Select (softkey) and you should see the list of ring types. If not, try reloading the phone. If that doesn't work, you'll have to start troubleshooting. Perhaps the file is corrupt. You should have two files (attached) in your TFTP directory. Mind you, the last selection is custom to us.

 
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Miller, Steve W. 
  To: Lelio Fulgenzi ; cisco-voip at puck.nether.net 
  Sent: Monday, June 19, 2006 3:35 PM
  Subject: RE: [cisco-voip] Different rings on the same phone set?


  Oh, OK.  There doesn't seem to be a list of different rings when I access the ring types from the settings on the phone.  I just see "default" and then "chirp".

  Steve W. Miller 
  Telecom Engineer 
  HOWREY, LLP 
  1299 Pennsylvania Ave, NW 
  Office IT103 (on B3 Level) 
  Washington, DC 20004 
  202-383-6949 (11-6949) 





------------------------------------------------------------------------------
  From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
  Sent: Monday, June 19, 2006 3:32 PM
  To: Miller, Steve W.; cisco-voip at puck.nether.net
  Subject: Re: [cisco-voip] Different rings on the same phone set?


  These must be set on the phone.

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  "I can eat fifty eggs." "Nobody can eat fifty eggs."
    ----- Original Message ----- 
    From: Miller, Steve W. 
    To: Lelio Fulgenzi ; cisco-voip at puck.nether.net 
    Sent: Monday, June 19, 2006 3:28 PM
    Subject: RE: [cisco-voip] Different rings on the same phone set?


    On the line settings on our Call Manager, we have:

    Ring settings IDLE
    Ring settings ACTIVE

    and under each of these fields, we have:

    disable
    Flash Only
    Ring Once
    Ring

    But I don't see anything about ring TYPE.  Where do you go to see what rings are available?  Thank you!

    Steve W. Miller 
    Telecom Engineer 
    HOWREY, LLP 
    1299 Pennsylvania Ave, NW 
    Office IT103 (on B3 Level) 
    Washington, DC 20004 
    202-383-6949 (11-6949) 





----------------------------------------------------------------------------
    From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
    Sent: Monday, June 19, 2006 2:37 PM
    To: cisco-voip at puck.nether.net
    Subject: Re: [cisco-voip] Different rings on the same phone set?


    Can you be more specific? Are you looking for different ring tones? If so, yes. Just follow the prompts in the ring settings section of the settings.

    If you're looking for different number of rings to voicemail, you need 4.1(x) I believe.

    --------------------------------------------------------------------------------
    Lelio Fulgenzi, B.A.
    Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
    (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
    "I can eat fifty eggs." "Nobody can eat fifty eggs."
      ----- Original Message ----- 
      From: Miller, Steve W. 
      To: Voll, Scott ; Lelio Fulgenzi ; cisco-voip at puck.nether.net 
      Sent: Monday, June 19, 2006 2:29 PM
      Subject: Different rings on the same phone set?


      Can you have different rings for different numbers on the same 7960? If so, how?  Thank you!

      Steve W. Miller 
      Telecom Engineer 
      HOWREY, LLP 
      1299 Pennsylvania Ave, NW 
      Office IT103 (on B3 Level) 
      Washington, DC 20004 
      202-383-6949 (11-6949) 




          -------------------------------------------------------------------------------------------------
          This email and any attachments contain information from the law firm of Howrey LLP, which may be confidential and/or privileged. 
          The information is intended to be for the use of the individual or entity named on this email. 
          If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this email is prohibited. 
          If you receive this email in error, please notify us by reply email immediately so that we can arrange for the retrieval of the original documents at no cost to you. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060619/8a5dd87a/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Ringlist.xml
Type: text/xml
Size: 2247 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060619/8a5dd87a/attachment.xml 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DistinctiveRingList.xml
Type: text/xml
Size: 649 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060619/8a5dd87a/attachment-0001.xml 


More information about the cisco-voip mailing list