[cisco-voip] Dial collection
Fedorov, Konstantin
kfedor at amt.ru
Tue Jun 20 10:53:46 EDT 2006
Hi, Brian.
ISDN Info - so you PBX send digits over overlap.
Whai is you scenario ? Two state dialing ??
Can you send a snip of
Debug isdn q931
And D channel configuration.
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brian Turnbow
Sent: Tuesday, June 20, 2006 6:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Dial collection
Hello all,
I have a 2821 with a E1 multiflex card connected to a PBX.
When analog lines of the pbx dial out I receive both the in band dialed digits and isdn info messages from the pbx.
This causes the router to send out in h323 the incorrect numer . For example 1234 gets sent out as 11223344
I have been looking for a way to disable the in band digit collection, but have yet to find out how.
Can any one point me in the right direction ?
Thanks
Brian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060620/fcd66dce/attachment.html
More information about the cisco-voip
mailing list