[cisco-voip] VG224 / SCCP / Modem

[Jason Aarons (US)]

You can plug a cheap analog phone into that VG224 and after the same x minutes get disconnected? Verify you can reproduce the problem.
 
Open a TAC case, sounds like you need some debugs, SDL traces, takes -jason

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Jeff Anderson
Sent: Tue 6/20/2006 12:50 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VG224 / SCCP / Modem


Question:
 
I have a client who is using a VG224 that is configured to use SCCP on CCM 4.1. The majority of the ports are used for modems but there are devices that need skinny features as well. The problem is the modem calls fail after a random amount of time. It could be anywhere from 5 - 30 minutes. That same modem plugged directly into a 1FB will have no reliability issues.
 
I have searched Cisco's website and their forums looking for some configuration guidelines for modem usage and found nothing. Does anyone have any advice to offer?
 
Thanks,
Jeff Anderson 


 



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060620/42d7bfbe/attachment-0001.html