[cisco-voip] CME - IP Phone "?" button

[Thyri Alfred]

Yes this is normal. Although it is described in the official
administration guide
(http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps5012/products
_feature_guide_chapter09186a00801812e1.html#wp2175456), it is not
supported, because there is no XML support on a router...

If you also have an installed CCM than you could point the link to the
CCM.

Alfred.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Mittwoch, 21. Juni 2006 20:14
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CME - IP Phone "?" button

 
I just completed my first CME installation.  On the IP Phones, when a
user hits the ? they don't get any help files.  It is like there is no
help files on CME.  Is this normal??


This email may contain proprietary and confidential information for the
sole use of the intended recipient. 
Any review, retransmission, dissemination, or other use of this
information by persons or entities other than the intended recipient is
prohibited. If you are not the intended recipient, please contact the
sender and delete all copies. To the extent that opinions are expressed
in this message, they are not necessarily the opinions of Sentinel
Technologies or any of its affiliates, employees, directors, officers or
shareholders.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip