[cisco-voip] 7914s not displaying line state on shared lines

[Jonathan Charles]

OK, no phones on the network are showing line state... I have set
privacy to false on both PUB and SUB, enabled the bridge, installed
extended services, updated the firmware to 8.0(3)...

I am completely out of ideas...


Jonathan

On 6/26/06, Jonathan Charles <jonvoip at gmail.com> wrote:
> Bite me
>
> So, when you quitting?
>
> On 6/26/06, Erick Bergquist <erickbe at yahoo.com> wrote:
> > IW
> >
> > ----- Original Message ----
> > From: Jonathan Charles <jonvoip at gmail.com>
> > To: Lelio Fulgenzi <lelio at uoguelph.ca>
> > Cc: ciscovoip <cisco-voip at puck.nether.net>
> > Sent: Monday, June 26, 2006 9:09:25 AM
> > Subject: Re: [cisco-voip] 7914s not displaying line state on shared lines
> >
> > The thing is, I have downloaded and installed the latest firmware and
> > have confirmed the 7914s are running it.
> >
> > Here's the worst part... the 7971s don't even show correct line state
> > on shared lines... and they are running the latest code...
> >
> > I don't get it... I am going to try a different firmware first...
> >
> > Jonathan
> >
> > On 6/26/06, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> > >
> > > I think this definately requires a TAC case.
> > >
> > > --------------------------------------------------------------------------------
> > > Lelio Fulgenzi, B.A.
> > > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> > > (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > > "I can eat fifty eggs." "Nobody can eat fifty eggs."
> > >
> > > ----- Original Message -----
> > > From: Jonathan Charles
> > > To: Lelio Fulgenzi
> > > Cc: ciscovoip
> > > Sent: Monday, June 26, 2006 9:54 AM
> > > Subject: Re: [cisco-voip] 7914s not displaying line state on shared lines
> > >
> > > Dozens of times at this point...
> > >
> > > I am checking the traces now...
> > >
> > >
> > >
> > > Jonathan
> > >
> > > On 6/26/06, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> > > >
> > > > ..and you've restarted the phones?
> > > >
> > > > that's just bizzare.
> > > >
> > > >
> > > --------------------------------------------------------------------------------
> > > > Lelio Fulgenzi, B.A.
> > > > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> > > > (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> > > >
> > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > > > "I can eat fifty eggs." "Nobody can eat fifty eggs."
> > > >
> > > > ----- Original Message -----
> > > > From: Jonathan Charles
> > > > To: Lelio Fulgenzi
> > > > Cc: Aman Chugh ; ciscovoip
> > > > Sent: Monday, June 26, 2006 9:46 AM
> > > > Subject: Re: [cisco-voip] 7914s not displaying line state on shared lines
> > > >
> > > > The bridge is enabled globally and manually on both devices
> > > >
> > > >
> > > > Jonathan
> > > >
> > > > On 6/26/06, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> > > > >
> > > > > I'm pretty sure that the Builtin Bridge Enable parameter has to be
> > > > enabled,
> > > > > either in the system parameters or on the phone configuration itself.
> > > > After
> > > > > any of these changes (privacy setting included) the phone has to be
> > > > > reset/restarted or something like that.
> > > > >
> > > > >
> > > >
> > > --------------------------------------------------------------------------------
> > > > > Lelio Fulgenzi, B.A.
> > > > > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> > > > > (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> > > > >
> > > >
> > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > > > > "I can eat fifty eggs." "Nobody can eat fifty eggs."
> > > > >
> > > > > ----- Original Message -----
> > > > > From: Jonathan Charles
> > > > > To: Aman Chugh
> > > > > Cc: ciscovoip
> > > > > Sent: Monday, June 26, 2006 9:26 AM
> > > > > Subject: Re: [cisco-voip] 7914s not displaying line state on shared
> > > lines
> > > > >
> > > > > I checked and globally Privacy is set to false, also, I tried it on
> > > > > some other phones and NONE of them show the shared line, line state...
> > > > >
> > > > >
> > > > > Jonathan
> > > > >
> > > > > On 6/25/06, Aman Chugh <aman.chugh at gmail.com> wrote:
> > > > > >
> > > > > > What is privacy set to .check the privacy settings
> > > > > >
> > > > > > -- Aman
> > > > > >
> > > > > >
> > > > > > On 6/25/06, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > > > > >
> > > > > > We have CallManager 4.1(3)sr3b with OS4.2sr8...
> > > > > >
> > > > > > Receptionist has a 7971 with two 7914 expansion modules.
> > > > > >
> > > > > > Created shared lines of the executives on the 7914s.
> > > > > >
> > > > > > We see them ring when you call them, but we don't see any line state
> > > > > > info on the 7914s (it always shows the phones on hook, no matter what
> > > > > > they are doing, unless they are ringing).
> > > > > >
> > > > > > We are running the latest DevPack, version 28-2 and the 7914s have
> > > > > > picked up the latest load.
> > > > > >
> > > > > > What am I missing?
> > > > > >
> > > > > >
> > > > > >
> > > > > > Jonathan
> > > > > > _______________________________________________
> > > > > > cisco-voip mailing list
> > > > > > cisco-voip at puck.nether.net
> > > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > > >
> > > > > >
> > > > > _______________________________________________
> > > > > cisco-voip mailing list
> > > > > cisco-voip at puck.nether.net
> > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > >
> > > >
> > > >
> > >
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> >
> >
> >
>