[cisco-voip] clid on fxs ports

[Anthony Kouloglou]

Hi all,
on a 2851 with one E1 and 4 FXS ports i have configured the voice port 
as follows:

voice-port 0/3/2
 cptone GB
 description xxx
 station-id name yyy
 station-id number 1234
 caller-id enable type 1


there is also these:

voice-port 0/2/0:15
 translation-profile incoming TP01
 bearer-cap Speech
interface Serial0/2/0:15
 no ip address
 isdn switch-type primary-net5
 isdn incoming-voice voice
 no cdp enable


dial-peer voice 10 pots
 destination-pattern 9T
 port 0/2/0:15


when i call from the analog phone to an ipphone extension internally i 
have clid (both name and number) to the ipphone

but when i make calls through the pri, i get "uknown number" to the 
external phone that i have called.
Is this ficed somehow?

Cheers
Anthony