[cisco-voip] clid on fxs ports
Ryan Ratliff
rratliff at cisco.com
Wed Jun 28 12:07:39 EDT 2006
Do you have a q931 debug showing the outbound call?
-Ryan
On Jun 28, 2006, at 12:03 PM, Anthony Kouloglou wrote:
Hi all,
on a 2851 with one E1 and 4 FXS ports i have configured the voice port
as follows:
voice-port 0/3/2
cptone GB
description xxx
station-id name yyy
station-id number 1234
caller-id enable type 1
there is also these:
voice-port 0/2/0:15
translation-profile incoming TP01
bearer-cap Speech
interface Serial0/2/0:15
no ip address
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
dial-peer voice 10 pots
destination-pattern 9T
port 0/2/0:15
when i call from the analog phone to an ipphone extension internally i
have clid (both name and number) to the ipphone
but when i make calls through the pri, i get "uknown number" to the
external phone that i have called.
Is this ficed somehow?
Cheers
Anthony
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list