[cisco-voip] Paging on a 7936

[Wes Sisk]

what phone load on the 7936?
does it show as being offhook and receiving mcast on the LCD?
are you trunking to the phone or using hardcoding access vlan = voice  
vlan?
in a packet capture do you see the 7936 send out an mcast join?

/Wes

On Jun 28, 2006, at 8:56 PM, Lyon, John R. wrote:

I have a stubborn 7936 conference station that won’t pick up the  
pages from a dn that is sending the pages to a multicast address.   
This is using a CME setup.  The phones at the site and the conference  
station are on the same switch and the phones pick up the pages, so  
it doesn’t appear to be a multicasting issue.  I’ve added the paging- 
dn line to the 7936’s ephone config exactly as it is on all the other  
phones in the office, yet they work and it doesn’t.  Everything else  
on the 7936 seems to be ok… inside and outside phone calls,  
registration with the CME, etc.  Just to be sure it wasn’t hardware,  
we’ve swapped out the 7936, but still no joy in Mudville.  Any ideas  
as to what might be amiss would be greatly appreciated.



Thanks,

John

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060628/0af44569/attachment.html