[cisco-voip] Disconnect of calls when switching to SRST
pwalenta at wi.rr.com
pwalenta at wi.rr.com
Thu Mar 2 12:55:23 EST 2006
If the router is H.323 to CM, this is normal.
There is a h225 timeout command you can disable so that calls will stay
active when the failover occurs.
If you search the archives, I know it's posted, because I can't for the
life of me remember right now.
----- Original Message -----
From: Hans-Peter Walter <Hans-Peter.Walter at tds.de>
Date: Thursday, March 2, 2006 11:30 am
Subject: [cisco-voip] Disconnect of calls when switching to SRST
To: cisco-voip at puck.nether.net
> I have a remote site with a 2811 running SRST. Whenever the main
> line goes
> down and the phones
> register to the router, already active calls are getting
> disconnected.
> Beginning a call short after ==> no problem,
> call from outside ==> no problem, the problem is just during the
> process
> of the SRST registering.
>
> IOS is 12.3(14)T5, I know it has some bugs, and I'm going to
> upgrade,
> just want to know who ever got similar problems.
> Phones are running 7.2(3.0), Router is default-gateway, h323-
> commands in
> if-config is set, call is routed over BRI-interfaces
> to local telecom. Switch is a cat3560 with PoE and voice and data-
> vlan.
> Anybody any clue?!?
More information about the cisco-voip
mailing list