[cisco-voip] Berbee, multicast etc..

[Ortiz, Carlos]

I use the IPcelerate paging and do know that you need to make sure that the multicast TTL is set high enough allow the page to get to the subnet.  Could that be an issue?
 
Carlos

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Jim McBurnett
Sent: Sat 3/4/2006 12:17 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Berbee, multicast etc..



I know there is a Berbee list, but I have a question..

If Berbee can send a page from a phone in the same subnet the Berbee
server is sitting in but can't send that page to a remote routed segment
when the Phone in the remote segment initiates the page.  What could the
cause be?

Situation 1:
        Phone IP a.b.c.200
        Berbee server a.b.c.102
        Phone initiates a page and it pages and live audio comes out on
phones on a routed Frame site on w.x.y.z /24 segment


Situation 2:
        Phone IP w.x.y.30
        Berbee Server a.b.c.102
        Phone initiates a page and all the berbee tones come out on the
speakers at w.x.y.z location.
                BUT live audio paging does not.

All routers are displaying the multicast route to the berbee server.

Ideas anyone?

Jim

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060304/19128d0a/attachment.html