[cisco-voip] Berbee, multicast etc..

[Voll, Scott]

The Berbee app uses G711.  You will need a transcoder or set the phone
at the remote site to use G711 across the WAN.  I had this problem also.


Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jim McBurnett
Sent: Saturday, March 04, 2006 9:17 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Berbee, multicast etc..

I know there is a Berbee list, but I have a question..

If Berbee can send a page from a phone in the same subnet the Berbee
server is sitting in but can't send that page to a remote routed segment
when the Phone in the remote segment initiates the page.  What could the
cause be?

Situation 1:
	Phone IP a.b.c.200
	Berbee server a.b.c.102
	Phone initiates a page and it pages and live audio comes out on
phones on a routed Frame site on w.x.y.z /24 segment


Situation 2:
	Phone IP w.x.y.30
	Berbee Server a.b.c.102
	Phone initiates a page and all the berbee tones come out on the
speakers at w.x.y.z location.
		BUT live audio paging does not.

All routers are displaying the multicast route to the berbee server.

Ideas anyone?

Jim

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip