[cisco-voip] getting dial tone from norstar
Philip Walenta
pwalenta at wi.rr.com
Mon Mar 6 12:51:15 EST 2006
It is possible in one of two ways.
1. Use a T1 port between them.
2. FXO cisco side, FXS (analog) station Norstar side.
I've used both methods before. I will say the Norstar does not have a lot
of fancy routing options, so be careful what you're trying to do.
_____
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Monday, March 06, 2006 10:41 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] getting dial tone from norstar
We have norstar mix 0 by 32 rel 7.1, we need to get dial tone from it to
a voice gateway and callmanger. Is this doable. I guess I need to trunk
from norstar to voice gateway. Have anybody seen this work before
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060306/d45146ac/attachment.html
More information about the cisco-voip
mailing list