[cisco-voip] Unity UM boxes not used

[Matt Slaga (US)]

You could check for a system report or user report in Unity.  I'm not
certain about that specific setting to report on, but I would think it
is there.

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Tuesday, March 07, 2006 4:23 PM
To: Cisco Voip
Subject: [cisco-voip] Unity UM boxes not used



Is there a simple way to find out how many mailboxes have never been
used and / or setup after the initial creation.

 

We have a Unity 4.0.5 box that is attached to our PBX and when we set it
up, we just went from a list that the old PBX VM server had.  So I think
there are a lot of VM boxes that have never been used.

 

Thanks

 

Scott

 

PS.  I really don't want to go VM box by VM box.




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060307/24285175/attachment.html