[cisco-voip] how to make a call from voice gateway

Jonathan Charles jonvoip at gmail.com
Fri Mar 10 11:25:37 EST 2006


debug voice vtsp all

That will give you the call setup info...

You can also try:

debug voip ccapi all

It isn't as slick as the output from a debug isdn q931, but you can see
digits being sent and received...




On 10 Mar 2006 16:21:05 GMT, James Grace <jgrace at digitelusa.net> wrote:
>
> what  the cnd to see CALL INFO GOING THRU T1 TRUNK   WE HAVE A TRUNK
> BETWEEN VOICE GW AND NORSTAR AND NEED TO SEE WHAT DIGIT I?M SENDING
>
> -----Original Message-----
>     From: "Jonathan Charles" <jonvoip at gmail.com>
>     Sent: 3/9/06 2:58:44 PM
>     To: "James Grace" <jgrace at digitelusa.net>
>     Cc: "Bernhard Albler" <balbler at nts.at>, "cisco-voip at puck.nether.net" <
> cisco-voip at puck.nether.net>
>     Subject: Re: [cisco-voip] how to make a call from voice gateway
>
>
>     from priviledged exec mode
>
>
>
>
>     J
>
>
>     On 3/9/06, James Grace <jgrace at digitelusa.net> wrote:
>     >
>     >  In what prompt do you enter this cmd .  I tried from  router# and
>     > router(config)#
>     >
>     >
>     >
>     >
>     >  ------------------------------
>     >
>     > *From:* Bernhard Albler [mailto:balbler at nts.at]
>     > *Sent:* Thursday, March 09, 2006 11:50 AM
>     > *To:* James Grace
>     > *Cc:* cisco-voip at puck.nether.net
>     > *Subject:* AW: [cisco-voip] how to make a call from voice gateway
>     >
>     >
>     >
>     >
>     >
>     > Hi,
>     >
>     > the command is:
>     >
>     > csim start <number>
>     >
>     >
>     >
>     > bernhard
>     >
>     >
>     >   ------------------------------
>     >
>     > *Von:* cisco-voip-bounces at puck.nether.net [mailto:
>     > cisco-voip-bounces at puck.nether.net] *Im Auftrag von *James Grace
>     > *Gesendet:* Donnerstag, 09. März 2006 17:23
>     > *An:* cisco-voip at puck.nether.net
>     > *Betreff:* [cisco-voip] how to make a call from voice gateway
>     >
>     >
>     >
>     > I was shown once on how to place a call out the gw by using
> cmd(s).  can
>     > not find my instruction I made.
>     >
>     >
>     >
>     > James D. Grace
>     >
>     > *CCNP CCNA MCSE MCDBA*
>     >
>     > Sr. System Engineer / Professional Svc.
>     >
>     > *Digitel Corporation*
>     >
>     >
>     >
>     > _______________________________________________
>     > cisco-voip mailing list
>     > cisco-voip at puck.nether.net
>     > https://puck.nether.net/mailman/listinfo/cisco-voip
>     >
>     >
>     >
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060310/40c36273/attachment-0001.html 


More information about the cisco-voip mailing list