[cisco-voip] Transfer to MeetMe from Unity

[Jonathan Charles]

It is opened by an internal subscriber... After which, someone else dials
into the call handler and I want them to be able to transfer into the meetme
(that has already been opened).



Jonathan

On 3/11/06, Adam Blomfield <adman at adman.net> wrote:
>
> On 3/11/06, Jonathan Charles <jonvoip at gmail.com> wrote:
> > OK, so, I created a boat-load of MeetMe numbers, and I want to be able
> to
> > have users be able to call a DID, and hit a call handler in unity that
> says,
> > 'enter a conference id'... and then transfer them to that meetme
> conference
> > (which is opened by an internal subscriber).
> >
> > However, I keep getting a 'you can not be transferred to this number,
> check
> > the number and try again' from unity if I use the caller system
> transfer...
> > I have confirmed the conference is active...
> >
> > If I try to just dial the meetme extension during the greeting, I get 'i
> did
> > not recognize that as a valid entry' from unity...
> >
> >
> >
> > What am I missing?
> >
> >
> > Unity version is 4.1(1)
> >
> > Though it might be 4.2(1) in another hour or so...
>
> MeetMe numbers have to be activated from a 79XX handset using the
> softkeys. TTBOMK there's no way to have them just sitting open at all
> times waiting for someone to dial in.
>
> -Adam
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060311/4ae41d86/attachment.html