[cisco-voip] How to find out MWI light is on - batch process?

[Stu Packett]

Wes:
Many, many, many THANKS!  This is a major time saver.  I was about to
ask my helpdesk to walk the floors and write down all the DNs with their
MWI on.

Thanks again.

-----Original Message-----
From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, March 14, 2006 8:53 AM
To: Stu Packett
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] How to find out MWI light is on - batch
process?

in your ccm database on the publisher

SELECT * FROM NumPlan WHERE tkLampBlinkRate_MessageWaiting = '2'

/Wes

Stu Packett wrote:
>
> CallManager 4.0(2a)sr2c
> Unity 4.1(1)
>
> So I'm going to be cutting over to Unity 4.1(1) this Friday evening 
> from an Octel system.  We're concerned that after someone leaves on 
> Friday evening, someone may leave them a voicemail before I cut over 
> to Unity.  The gap could be about 3 hours.  Is there a batch process 
> of finding out which phones have their MWI (message waiting indicator)

> light on before I cut over to Unity?  I'd like to make a note of those

> phones so I can inform the user how to retrieve their Octel messages.
>
> Thanks in advance.
>
>
>
>
>
>
>
>
> Disclaimer: If you have received this message in error, call (650) 
> 988-8500 and delete or destroy any copy of this message.
>
>
------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>