[cisco-voip] Half duplex, inline power, 4507R problem
Wydra, Jason
jwydra at Burwood.com
Wed Mar 15 16:12:38 EST 2006
Client has some PCs that for some reason have to run at 10/half and they
will be sitting behind the phones. I had the same question myself.
Thanks,
Jason Wydra
Consultant
burwood group, inc.
Phone: (312) 327-4677
Cell: (312) 493-2834
jwydra at burwood.com
________________________________
From: Voll, Scott [mailto:Scott.Voll at wesd.org]
Sent: Wednesday, March 15, 2006 3:11 PM
To: Mike Mike; Wydra, Jason
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Half duplex, inline power, 4507R problem
With that all being said, Why would you run a IP Phone at half, let
alone 10 half?
Scott
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Mike
Sent: Wednesday, March 15, 2006 12:45 PM
To: Wydra, Jason
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Half duplex, inline power, 4507R problem
There is a bug related to this when using 10M Full mode: CSCdz65458.
Maybe it is the 10M that is messing you up. Check it out.
Mike
On 3/15/06, Wydra, Jason <jwydra at burwood.com> wrote:
Anyone have an idea why a 4507R switch with a WS-X4148-RJ45V line card
might have a problem supplying inline power to a 7940G while in 10M/Half
duplex mode? Works fine with 100M/Full.
Thanks,
Jason
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060315/8381cb8b/attachment-0001.html
More information about the cisco-voip
mailing list