[cisco-voip] Half duplex, inline power, 4507R problem
Turpin, Mark
mark.turpin at bryancave.com
Wed Mar 15 17:13:26 EST 2006
So why not run the phone at 100, and the PC port at 10/half?
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wydra, Jason
Sent: Wednesday, March 15, 2006 3:13 PM
To: Voll, Scott; Mike Mike
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Half duplex, inline power, 4507R problem
Client has some PCs that for some reason have to run at 10/half and they
will be sitting behind the phones. I had the same question myself.
Thanks,
Jason Wydra
Consultant
burwood group, inc.
Phone: (312) 327-4677
Cell: (312) 493-2834
jwydra at burwood.com
________________________________
From: Voll, Scott [mailto:Scott.Voll at wesd.org]
Sent: Wednesday, March 15, 2006 3:11 PM
To: Mike Mike; Wydra, Jason
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Half duplex, inline power, 4507R problem
With that all being said, Why would you run a IP Phone at half, let
alone 10 half?
Scott
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Mike
Sent: Wednesday, March 15, 2006 12:45 PM
To: Wydra, Jason
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Half duplex, inline power, 4507R problem
There is a bug related to this when using 10M Full mode: CSCdz65458.
Maybe it is the 10M that is messing you up. Check it out.
Mike
On 3/15/06, Wydra, Jason <jwydra at burwood.com> wrote:
Anyone have an idea why a 4507R switch with a WS-X4148-RJ45V line card
might have a problem supplying inline power to a 7940G while in 10M/Half
duplex mode? Works fine with 100M/Full.
Thanks,
Jason
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
This electronic message is from a law firm. It may contain confidential or privileged information. If you received this transmission in error, please reply to the sender to advise of the error and delete this transmission and any attachments.
IRS Circular 230 Disclosure: To ensure compliance with requirements imposed by the IRS, we inform you that any U.S. federal tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing, or recommending to another party any transaction or matter addressed herein.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060315/a2e2c31c/attachment-0001.html
More information about the cisco-voip
mailing list