[cisco-voip] 7920 2.0 firmware and shared lines vs 1.08

[Erick Bergquist]

Wes. That was it. Thanks! Funny thing is it worked on
1.08 with privacy enabled on the other phone. I also
found in a earlier post that the barge softkey on 7920
appears but can't be used.

--- Wes Sisk <wsisk at cisco.com> wrote:

> Do you have privacy enabled or disabled?
> 
> Erick Bergquist wrote:
> > Hi,
> >
> > On 7920s with shared line on 2.0 firmware the
> little
> > status icon next to shared line does not change
> when
> > someone is on the shared line and we don't see
> remote
> > in use on bottom of display when the line is
> > highlighted, and do not get barge softkey either.
> On a
> > phone with a 1.08 firmware we see the status icon
> on
> > the shared line change when it is in use and eee
> > remote in use on bottom of display and the barge
> > softkey. Looking over the release notes and known
> > issues, etc am not seeing this mentioned as a
> issue
> > with the 2.0 loads.
> >
> > Thanks
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> > http://mail.yahoo.com 
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >   
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com