[cisco-voip] using t1 ground start for LD

[Jonathan Charles]

Should be just a standard ds0-group on the controller and specify
ground-start instead of E&M...

It should then create a voice-port for it.




Jonathan

On 3/21/06, James Grace <jgrace at digitelusa.net> wrote:
>
>  we are going from meridian to cisco.  currently they use t1 ground start
> for LD.  I know this a old technolgy but need to configure the voice gateway
> to handle it. we have 2821 running 12.4.5a.  we are using vwic ti
> controllers
>
>
>
> James D. Grace
>
> *CCNP CCNA MCSE MCDBA*
>
> Sr. System Engineer / Professional Svc.
>
> *Digitel Corporation*
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060321/e8dcc197/attachment.html