[cisco-voip] Attendant console pc with two ip addresses
Fedorov, Konstantin
kfedor at amt.ru
Wed Mar 22 10:10:10 EST 2006
Hi,
What kind of problem you have when configure ip address manually in the
AC ??
I think that this is right way to hard tie ip address with AC when PC
have two ip addresses.
To deeper analyze problem collect TCD traces in the CCM.
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ruben Montes
(EU)
Sent: Wednesday, March 22, 2006 2:08 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Attendant console pc with two ip addresses
Hi,
I'm running into a little problem... I'm installing the attendant
console in a customer environment where all the PCs have two ip
addresses: one logical network connection with an ip address used for a
specific application, and then the normal ehernet connection to access
all the resources in the network.
The problem is that the Assistant console is taking this first special
ip instead the second one, which must be used: the application takes so
many time to start and we have problems for example, to park a call,
which is not permited. If we put manually the ip address in the
assistant console configuration (the nework ip), then we still having
some problems.
If we disable the logical interface all works fine...
Any idea what could be happening or how can I investigate this issue
deeper?
Thanks in advance,
Ruben
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060322/21039ce3/attachment.html
More information about the cisco-voip
mailing list