[cisco-voip] How to add the # sign at the end of the number?

Craig M Staffin CMStaffin at ra.rockwell.com
Fri Mar 24 09:02:08 EST 2006


Anthony,

This is the exact reason why we do not use MGCP on any gateways (unless we 
absolutly need to) and we do all digit manipulation on the gateway. 
Callmanager does not give you nearly enough functions for digit 
manipulation

Craig





Anthony Kouloglou <akoul at dataways.gr>
Sent by: cisco-voip-bounces at puck.nether.net
03/24/2006 05:35 AM

 
        To:     "cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
        cc: 
        Subject:        Re: [cisco-voip] How to add the # sign at the end of the number?



I think i will go crazy!!
There is no way to add a particular pattern at the end of a pattern 
withing a CCM dial plan?
It does not seem reasonable... :-(

Anthony

Teodor Dobrev wrote:
> Are we talking for dial rules on the gateway? If so you can make 
something like that
>
> voice translation-rule 2
>  rule 1 /^02\(.*\)/ /0\1#/ type any unknown plan any unknown
>  rule 2 /^0\(.*\)/ /00\1#/ type any unknown plan any unknown
>  rule 3 /^3592\(.*\)/ /0\1#/ type any unknown plan any unknown
>  rule 4 /^359\(.*\)/ /00\1#/ type any unknown plan any unknown
>
> What happens is that you match any call starting with 02, get any digits 
after as set1 and put this set of digits after 0, and put # at the end
> Hope that work for you!
>
> BR,Teo
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net 
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Kouloglou
> Sent: 24 ???? 2006 ?. 09:48
> To: cisco-voip at puck-nether.net
> Subject: [cisco-voip] How to add the # sign at the end of the number?
>
> Hi all,
> all my route patterns are configured at the end with the "#" sign. For 
> example i have a 0.!# general pattern for outside calls. I had to put 
> the # to provide the end of the call.
> Now, i want to be able to make calls from the OutlookExpress contacts. I 

> can use Dial Rules to make any changes i want to the prefix but how can 
> i add the # sign at the end of each call?
>
> Thanks
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060324/901c9496/attachment.html 


More information about the cisco-voip mailing list