[cisco-voip] 4506 sw is not see cdp ip phones
Voll, Scott
Scott.Voll at wesd.org
Fri Mar 24 10:59:17 EST 2006
Is CDP enabled globally? Is CDP disable on a port bases?
Scott
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Friday, March 24, 2006 7:01 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 4506 sw is not see cdp ip phones
We are trying to see up a new vlan on a 4506 for voice. We configured
the sw ports for the cm gw and the phone just like we always do. But
for some reason if I do a show cdp neighbor all the phones will not show
up. And sometimes I can run the cmd and see 2 phone and then run it
again a sec later and it will only show one. I change the cdp timer to
5 from 60, and no differents. This first time I notice I was having a
issue is when the phone would not get a ip address from the pool I
configure on the switch, sometime it will get one from the date remote
dhcp server or not at all
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060324/3a172314/attachment.html
More information about the cisco-voip
mailing list