[cisco-voip] 4506 sw is not see cdp ip phones

[James Grace]

I want to say yes to cdp. Because the sw see the cdp some time 

 

This is the ver ios

boot system flash bootflash:cat4000-i9s-mz.121-20.EW1.bin

 

  _____  

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Friday, March 24, 2006 10:59 AM
To: James Grace; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 4506 sw is not see cdp ip phones

 

Is CDP enabled globally?  Is CDP disable on a port bases?

 

Scott

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Friday, March 24, 2006 7:01 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 4506 sw is not see cdp ip phones

 

 

We are trying to see up a new vlan on a 4506 for voice.   We configured the
sw ports for the cm gw and the phone just like we always do.  But for some
reason if I do a show cdp neighbor all the phones will not show up.  And
sometimes I can run the cmd and see 2 phone and then run it again a sec
later and it will only show one.  I change the cdp timer to 5  from 60, and
no differents.  This first time I notice I was having a issue is when the
phone would not get a ip address from the pool I configure on the switch,
sometime it will get one from the date remote dhcp server or  not at all 

 

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060324/6cbde3c1/attachment.html