[cisco-voip] MCID Feature
Tim Reimers
tim.reimers at asheville.k12.nc.us
Fri Oct 20 09:53:05 EDT 2006
Thanks for posting this, Wes
After our conversion to MGCP later this month, this is something I'm
considering doing as well, so it will be good
to take this to my carrier as well. (BellCrap)
thanks, Tim
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Wednesday, October 18, 2006 11:35 PM
To: Stu Packett
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MCID Feature
http://www.cisco.com/en/US/products/ps6441/
products_configuration_guide_chapter09186a0080541bc6.html#wp1009143
in h.323 mode only pri-net5 isdn protocol supports it.
in mgcp backhaul, NI2 and ETSI are supported:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/
products_administration_guide_chapter09186a00801ed117.html#98554
references:
[1] ITU Q.951.7 - Stage 3 description for number identification
supplementary services using DSS 1: Malicious Call Identification (MCID)
[2] ITU-T Recommendation Q.932 (1993), Generic procedures for the
control of ISDN supplementary services [3] CCITT Recommendation X.219
(1988), Remote operations: Model, notation and service definition [4]
ITU-T Recommendation Q.931 (1993), Digital Subscriber Signalling System
No. 1 (DSS 1) ISDN user-network interface layer 3 specification for
basic call control.
[5] CCITT Recommendation X.208 (1988), Specification of Abstract Syntax
Notation One (ASN.1).
[6] CCITT Recommendation I.251.7 (1992), Malicious call identification.
ITU-T Recommendation Q.81.7 (1997), Stage 2 description for number
identification supplementary services: Malicious Call Identification
(MCID)
Looks like the FacilityIE invokes an operation called 'McidRequest'.
Q.951.7 contains most of the juicy details. Perhaps your carrier may
recognize some of the verbiage here.
/Wes
On Oct 18, 2006, at 5:44 PM, Stu Packett wrote:
I got MCID setup on my CallManager and phones, but after speaking with
my PRI carrier, they said that they don't have a feature related to
malicious caller identification (MCID). I've got H323 gateways and PRI
lines from ATT (formerly SBC). At this point, the MCID feature is not
doing me any good if I can't work with the PRI carrier to identify a
malicious caller. Does anyone have MCID working with their local PRI
carrier? Am I missing something that I should ask my PRI carrier for?
Thanks in advance.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list