[cisco-voip] Polycom SE200 H.323 Gatekeeper w/ CCM 4.1(3)

[Philip Walenta]

Hi Dave, I work for Polycom, and the SE200 is one of the products I deal
with daily.
 
I'm currently in the middle of writing a white paper for Polycom on this
subject and hope to have it ready to go in about a week or so.
 
I will contact you off-list then.

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dave Wolgast
Sent: Friday, August 03, 2007 2:38 PM
To: Cisco VOIP Newsletter - puck.nether.net
Subject: [cisco-voip] Polycom SE200 H.323 Gatekeeper w/ CCM 4.1(3)


I'm hoping someone out there has some experience with this platform...I have
established a Gatekeeper-controlled H.323 trunk with the SE200, and can now
make audio calls to my Polycom VSX endpoints.  What I don't know how to do
is to set up dialing in the other direction (VSX -> CCM endpoints). 
 
The system was configured with a single site.  Do I need to add a site in
order to make this happen?  Where do I put dial-plan information (If 1000 is
dialed, send to the H.323 trunk, etc...).
 
Any help is greatly appreciated.

-- 
Dave Wolgast
Livonia, NY 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070803/38ea7cc7/attachment.html