[cisco-voip] Qsig with 3Com NBX 5000

[Manuel Cristobal (US)]

Anyone has successfully deployed a QSIG trunk between a 3com NBX 5000
PBX and a Cisco 2800 gateway via a T1 card?

If so, please share the pain.

 

 

Thanks. 

Regards,

 

Manuel Cristobal

Solutions Architect

Dimension Data

Office 954 757 0737

Cell  954 495 0274

manuel.cristobal at us.didata.com <mailto:manuel.cristobal at us.didata.com> 

 

Visit us on the web at http://www.dimensiondata.com/na
<http://www.dimensiondata.com/na>  

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070807/3ceccd9a/attachment.html