[cisco-voip] Conference with G.711 and G.729
Paul Choi
asobihoudai at yahoo.com
Thu Jul 5 04:03:32 EDT 2007
Usually transcoding is done via DSPs installed in the
gateways or via a hardware MTP which is likely packed
with DSPs also. This is my understanding and I could
very likely be incorrect.
--- Reto Gassmann <voip at mrga.ch> wrote:
> Hi all
> we run a CM 4.2(3) and have some phones wih G729 and
> some phones with G711. It
> is not possible to set up a conference between G729
> and G711 phones.
> What do I need if I want to enable conferences
> between G711 and G729 phones?
>
> Cisco writes about transcoders, but as it seems all
> of them are hardware based.
> So if I understand that right: the CallManger itself
> is not able to do the
> transcoding work.
>
> Thanks for feedback
> Reto
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
____________________________________________________________________________________
Shape Yahoo! in your own image. Join our Network Research Panel today! http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7
More information about the cisco-voip
mailing list