[cisco-voip] CM 4.1 and Siemens PBX integration

[Jason Aarons (US)]

You need to set CCMService, Tracing to detailed and try a supplementary
service, what do the log files indicate is happening? You may need a TAC
case to read the log files for you. RTMT or PerfMon show any resources
unavailable? 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Constel
Sent: Thursday, July 05, 2007 9:36 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CM 4.1 and Siemens PBX integration

Hi,

I'm dealing with an issue covering CM 4.1(3) and Siemens HiPath PBX with

HG1500 (with voip modules).
We have to make it talk to each other.
We're able to call from CM to PBX and vice versa just by adding a PBX
like a 
H323 gateway at CM and point a route-pattern to its IP.
The problem is I can't use supplementary services (transfer, conference,

hold, etc.)

We have tried to put an IP-to-IP Gateway "in the middle" to join both CM
and 
PBX h323 legs, but it didn't work too.

The router was configured like that:

voice service voip
 allow-connections h323 to h323
 signaling forward unconditional
 h323

MTP was enabled on CM, also "Enable Outbound FastStart" was marked on
the 
gateway configuration.

Does anyone have tried that before?
Any help will be appretiated

thank you
Marcelo 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.